KY-196
FEATURES
  • 720 channel communications transceiver with a frequency of 118.000-135.975MHz
  • Flip-flop frequency switch to transfer between active and standby frequencies
  • 7 watts minimum power output
  • 28 volt operation only
  • Models available [E versions] with different receiver selectivity (see table below)
  • Models available with 9 memory channel frequencies preprogramming capablility (see table below)
  • Models available with remote transfer capablility of use and standby frequencies and the remote recall of channel frequency information (see table below)
  • Models available with standard or non-glare display lens (see table below)
  • Modifications available through factory service bulletins to extend frequency range and convert receiver selectivity
  • TSO'd
    SPECIFICATIONS
    Size: 6.25"W x 1.3"H x 10.50"L Weight: 3.2 lbs.
    TSO Compliance (Transmitter): TSO C37b (DO-157, Class 3) TSO Compliance (Receiver): TSO C38b (DO-156, Class C & D (KY-196 models); TSO C38b (DO-156, Class A & B (KY-196E models); DO-160 Env. Cat./A1D1/A/KPS/XXXXXXZBAAA
    Power Output: 7 Watts min. Duty Cycle: 1 minute on, 4 minutes off
    Temperature Range: -20 to +55C Frequency Range: 118.00 to 135.975MHz in 25KHz increments
    Modulation: 85% modulation with 90% limiting. Less than 15% distortion at 85% modulation Receiver Sensitivity: 2uV (hard) or less for 6dB S+N/N with 1KHz tone modulated 30%
    Frequency Stability: 0.0015% to meet DO-156 Class C and D Sidetone Output: Adjustable up to 100mW into 500 ohm headphones
    Harmonic Content: Greater than 60dB down from carrier Receiver Output: 100mW into 500 ohms minimum
    Receiver Selectivity (KY-196): 6dB at +-8KHz minimum DO-156 Class C & D; 40dB at +-17KHz maximum, 60dB at +-22KHz maximum Receiver Selectivity (KY-196E): 6dB at +-15KHz minimum DO-156 Class A & B, 60dB at +-43KHz maximum
    Squelch: Automatic with manual disable and carrier squelch override Spurious Responses: At least 80dB down